About ST
Products
Applications
Support
Buy
News & Events
ST Worldwide
Contact Us
my.ST Login
Datasheets
|
Power Management
|
DC-DC Conversion
|
Step - Down
Up to 1A step down switching regulator
Datasheet
Format:
(268 kb)
or
(14 kb)
Last Updated: 16/10/2007
Pages: 16
Related Application Notes
Application ideas: driving LEDs using L497x, L597x, L692x DC-DC converters families
Designing with the L5970D 1A high efficiency DC-DC converter
High intensity LED driver using the L5970D/L5973D
LEDs Array Reference Board Design
Solar-LED streetlight controller with 25 W LED lamp driver and 85 W battery charger based on the STM32F101Rx
Related Information
Additional Information: L497x & L597x On line switching regulator simulators
DC-DC Conversion Product Page
Related Press Releases
STMicroelectronics Announces Versatile Stepdown Switching Regulator Combining Efficiency, Small Size and Low Parts Count
Related User Manuals
Low voltage motor control demonstration board based on ST7MC MCU
STEVAL-ISA054V1, 100 W SMPS based on the STW9N150 Power MOSFET and UC3844B for industrial applications
Raw Ascii Text
- (
Hide
)
(Unformatted textual content of the document used by search engines)
L5970D
Up to 1A step down switching regulator
Features
Up to 1A output current Operating input voltage from 4.4V to 36V 3.3V / (2%) reference voltage Output voltage adjustable from 1.2V to 35V Low dropout operation: 100% duty cycle 250KHz Internally fixed frequency Voltage feedforward Zero load current operation Internal current limiting Inhibit for zero current consumption Synchronization Protection against feedback disconnection Thermal shutdown
SO8
Description
The L5970D is a step down monolithic power switching regulator capable to deliver up to 1A at output voltages from 1.2V to 35V. The device uses an internal P-Channel D-MOS transistor (with a typical Rdson of 250m) as switching element to minimize the size of the external components. An internal oscillator fixes the switching frequency at 250KHz. Having a minimum input voltage of 4.4V only, it is particularly suitable for 5V bus, available in all computer related applications. Pulse by pulse current limit with the internal frequency modulation offers an effective constant current short circuit protection.
Applications
Consumer: STB, DVD, TV, VCR, car radio, LCD monitors Networking: XDSL, modems, DC-DC modules Computer: printers, audio/graphic cards, optical storage, hard disk drive Industrial: changers, car battery, DC-DC converters Test application circuit
3.3V VIN = 4.4V to 35V VREF VCC SYNC. C1 10F 35V CERAMIC COMP C4 22nF C3 220pF 6 8 2 4 INH. R3 4.7K
Figure 1.
1
OUT
L1 33H D1 STPS2L40U
VOUT=3.3V
L5970D
3 7 5 GND FB
R1 5.6K
C2 100F 10V
R2 3.3K
D98IN954C
October 2007
Rev 16
1/16
www.st.com 16
Contents
L5970D
Contents
1 Pin settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 1.2 Pin connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 2.2 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 4 5 6 7 8 9
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Application circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Application ideas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
L5970D
Pin settings
1
1.1
Pin settings
Pin connection
Figure 2. Pin connection (top view)
OUT SYNC INH COMP
1 2 3 4
D98IN955
8 7 6 5
VCC GND VREF FB
1.2
Pin description
Table 1. Pin description
N 1 2 3 4 5 6 7 8 Type OUT SYNC INH COMP FB VREF GND VCC Regulator output. Master/slave synchronization. A logical signal (active high) disables the device. If INH not used the pin must be grounded. When it is open an internal pull-up disable the device. E/A output for frequency compensation. Feedback input. Connecting directly to this pin results in an output voltage of 1.23V. An external resistive divider is required for higher output voltages. 3.3V VREF. No cap is requested for stability. Ground. Unregulated DC input voltage. Description
3/16
Electrical data
L5970D
2
2.1
Electrical data
Maximum ratings
Table 2. Absolute maximum ratings
Symbol V8 V1 I1 V4, V5 V3 V2 PTOT TJ TSTG Input voltage Output DC voltage Output peak voltage at t = 0.1s Maximum output current Analog pins INH SYNC Power dissipation at TA 60C Operating junction temperature range Storage temperature range Parameter Value 40 -1 to 40 -5 to 40 int. limit. 4 -0.3V to VCC -0.3 to 4 0.75 -40 to 150 -55 to 150 V W C C V Unit V V V
2.2
Thermal data
Table 3. Thermal data
Symbol RthJA Parameter Maximum thermal resistance junction-ambient SO8 120 (1) Unit C/W
1. Package mounted on board
4/16
L5970D
Electrical characteristics
3
Electrical characteristics
Table 4. Electrical characteristics ( TJ = 25C, VCC = 12V, unless otherwise specified)
Symbol VCC RDS(on) Il fs Parameter Operating input voltage range Mosfet on Resistance Maximum limiting current Switching frequency 225 Duty cycle Dynamic characteristics (see test circuit ). V5 h Voltage feedback Efficiency 4.4V < VCC < 36V, 20mA < IO < 2A VO = 5V, VCC = 12V 1.220
(1)
Test condition Vo = 1.235V; Io = 2A
(1)
Min 4.4
Typ
Max 36
Unit V A KHz KHz %
(1)
0.250 1.5 1.87 250 250
0.5 2.25 280 275 100
VCC = 4.4V to 36V
(1)
212
0
1.235 1.235 90
1.25 1.272
V V %
1.198
DC characteristics Iqop Iq Total operating quiescent current Quiescent current Duty cycle = 0; VFB = 1.5V Vinh > 2.2V Iqst-by Total stand-by quiescent current VCC = 36V; Vinh > 2.2V
(1) (1)
3
5 2.5
mA mA A A
50 80
100 150
(1)
Inhibit INH threshold voltage Error amplfier VOH VOL Io source High level output voltage Low level output voltage Source output current VFB = 1V VFB = 1.5V VCOMP = 1.9V; VFB = 1V 200 300 3.5 0.4 V V A Device ON Device OFF 2.2 0.8 V V
5/16
Electrical characteristics Table 4. Electrical characteristics (continued) ( TJ = 25C, VCC = 12V, unless otherwise specified)
Symbol Io sink Ib Parameter Sink output current Source bias current DC open loop gain gm Transconductance RL = Icomp = -0.1mA to 0.1mA VCOMP = 1.9V 50 Test condition VCOMP = 1.9V; VFB = 1.5V Min 1 Typ 1.5 2.5 65 4 Max
L5970D
Unit mA A dB
2.3
mS
Sync function High input voltage Low input voltage Slave sink current Master output amplitude Output pulse width Reference section Reference voltage IREF = 0 to 5mA VCC = 4.4V to 36V Line regulation Load regulation Shor t circuit current IREF = 0mA VCC = 4.4V to 36V IREF = 0 to 5mA 10
(1)
VCC = 4.4V to 36V VCC = 4.4V to 36V Vsync = 0.74V (2) Vsync = 2.33V Isource = 3mA no load, Vsync = 1.65V
2.5
VREF 0.74
V V mA mA V s
0.11 0.21 2.75 0.20 3 0.35
0.25 0.45
3.234 3.2
3.3 3.3
3.366 3.399
V V
5
10
mV
8 18
15 30
mV mA
1. Specification Referred to TJ from -40 to 125C. Specification over the -40 to +125 TJ Temperature range are assured by design, characterization and statistical correlation. 2. Guaranteed by design.
6/16
L5970D
Typical characteristics
4
Typical characteristics
Figure 3.
Tj(C)
Junction temperature vs output current
Figure 4.
Vo (V) 3.312
Load regulator
130 120 110 100 90 80 70 60 50 40 30 20 0.2
Vo=3.3V
Vo=2.5V
3.308 3.304 3.3 3.296 3.292 3.288 3.284 3.28 3.276
Vcc = 12V Vo = 3.3V Tj = 25C
Vcc=5V Tamb=25C
Vo=1.8V
Tj = 125C
0.4
0.6
0.8
Io(A)
1
1.2
1.4
1.6
0
0.5 Io (A)
1
1.5
Figure 5.
Tj(C)
Junction temperature vs output current
Figure 6.
Vo (V) 3.312
Line regulator
13 0 12 0 110 10 0 90 80 70 60 50 40 30 20 0. 2
V o =5 V Vc c = 1 2V Tam b=25C
Vo =3.3V
3.308 3.304 3.3 3.296 3.292 3.288 3.284 3.28 3.276
Vcc = 12V Vo = 3.3V
Tj = 25C
V o =2 . 5 V
Tj = 125C
0 .4
0 .6
0 .8
Io (A)
1
1 .2
1 .4
1 .6
0
10
20 Vcc (V)
30
40
Figure 7.
Junction temperature vs output current
Figure 8.
Vo (V) 1.25
Output voltage vs junction temperature
T j ( C )
14 0 12 0 10 0 80 60 40 20 0 0 .2
Vcc=24V Tam b=25C
Vo= 18V
Vo =12V
1.24
Vo = 5 V
1.23 1.22 Vcc = 12V 1.21 1.2 Vcc=12V
0 .4
0 .6
0 .8
Io (A )
1
1 .2
1. 4
-50
0
50 Tj (C)
100
150
7/16
Typical characteristics
L5970D
Figure 9.
Iq (mA)
Quiescent current vs junction temperature
Figure 10. Switching frequency vs junction temperature
Fsw (KHz) 260
2
1.8
250
1.6 Vcc = 12V DC = 0%
240
1.4
230
Vcc = 12V Vo = 3.3V
1.2 -50 0 50 Tj (C) 100 150
220 -50 0 50 Tj (C) 100 150
Figure 11. Shutdown current vs junction Figure 12. Efficiency vs output current temperature
Ishd (A) 70
Vcc = 12V
Efficiency (%)
60
50
40
30 -50 0 50 Tj (C) 100 150
94 92 90 88 86 84 82 80 78 76 74 72 70 0.1
Vo=3.3V Vo=2.5V
Vo=1.8V Vcc=5V 0.2 0.3 0.4 0.5 0.6 Io (A) 0.7 0.8 0.9 1
Figure 13. Efficiency vs output current
92 90 88 86 84 82 80 78 76 74 72 70
Vo=5V Vo=3.3V
Efficiency (%)
Vo=2.5V Vcc=12V 0.1 0.2 0.3 0.4 0.5 0.6 Io (A) 0.7 0.8 0.9 1
8/16
L5970D
Application circuit
5
Application circuit
Figure 14. Demo board application circuit
VREF VCC SYNC. C1 10F 25V CERAMIC COMP C4 22nF C3 220pF
3.3V VIN = 4.4V to 25V
6 8 2 4 INH.
1
OUT
L1 33H D1 STPS2L25U
VOUT=3.3V
L5970D
3 7 5 GND FB
R1 5.6K
C2 100F 10V
R3 4.7K
R2 3.3K
D03IN1437
Table 5. Component list
Reference C1 C2 C3 C4 R1 R2 R3 D1 L1 STPS2L25U DO3316P-333 Part number GRM32DR61E106KA12L POSCAP 10TPB100M C1206C221J5GAC C1206C223K5RAC Description 10F, 25V 100F, 10V 220pF, 5%, 50V 22nF, 10%, 50V 5.6K, 1%, 0.1W 0603 3.3K, 1%, 0.1W 0603 4.7K, 1%, 0.1W 0603 2A, 25V 33H, 2A Manufacturer MURATA Sanyo KEMET KEMET Neohm Neohm Neohm STMicroelectronics COILCRAFT
9/16
Application circuit Figure 15. PCB layout (component side)
L5970D
Figure 16. PCB layout (bottom side)
Figure 17. PCB layout (front side)
10/16
L5970D
Application ideas
6
Application ideas
Figure 18. Dual output voltage with auxiliary winding
N1/N2=2 D2 1N4148 VOUT1=5V 30mA
VIN=12V
VCC
OUT
Lp=22uH
D1 STPS25L25U
8
COMP C1 10uF 25V Ceramic
1 U1 L5970D
FB
VOUT=3.3V 0.5A C4 100uF 10V C5 47uF 10V
4 2 6
GND
7
5 3
INH
C2 220pF
C3 22nF R3 4.7k
SYNC VREF
3.3V
Figure 19. Buck-boost regulator
VIN=12V VCC OUT
L1 33uH
8 U1
COMP C1 10uF 25V Ceramic
C2 10uF C3 35V Ceramic 220pF
1
D1 STPS2L25U
2.7k VOUT=-12V/0.3A
L5970 4 2 6
GND
7
5 3
FB
C4 22nF R3 4.7k
SYNC VREF
INH
24k
C5 100uF 16V
3.3V
Vin=12V Vout=-12V
Iout=0.5A Efficiency=81%
Figure 20. Positive Buck-Boost regulator
VIN=5V
L1 33uH
VCC
8 U1 L5970 4 2 6
GND
OUT
D2 STPS2L25U
VOUT=12V/0.3A
1
D1 STPS2L25U
24k
COMP C1 10uF 25V Ceramic
7
5 3
FB
C2 220pF
C3 22nF R3 4.7k
M1 STN4NE03L
2.7k
SYNC VREF
INH
C4 100uF 16V
3.3V
Vin=5V Vout=12V Iout=0.3A Efficiency=76%
Figure 21. Synchronization example
V IN VCC OU T VCC OU T
8 L5970D 4 2
SYNC VR EF
1
FB COMP
8 L5970D 4 2
SYNC VR EF
1
FB
COMP
6
GN D
7
5 3
6
GN D
7
5 3
IN H
INH
11/16
Package mechanical data
L5970D
7
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
12/16
L5970D
Package mechanical data
Table 6. SO-8 mechanical data
mm. Dim. Min A 1.35 Typ Max 1.75 Mi n 0.053 Typ Ma x 0.069 inch
A1 A2 B C
D
0.10 1.10 0.33 0.19 4.80 3.80 1.27 5.80 0.25 0.40
0.25 1.65 0.51 0.25 5.00 4.00
0.004 0.043 0.013 0.007 0.189 0.15 0.050
0.010 0.065 0.020 0.010 0.197 0.157
(1)
E e H h L k ddd
6.20 0.50 1.27
0.228 0.010 0.016
0.244 0.020 0.050
0 (min.), 8 (max.) 0.10 0.004
1. Dimensions D does not include mold flash, protru-sions or gate burrs. Mold flash, potrusions or gate burrs shall not exceed 0.15mm (.006inch) in total (both side).
Figure 22. Package dimensions
13/16
Order codes
L5970D
8
Order codes
Table 7. Order codes
Part number L5970D L5970D013TR Package SO8 SO8 Packaging Tube Tape and reel
14/16
L5970D
Revision history
9
Revision history
Table 8. Revision history
Date 26-Jan-2007 16-Mar-2007 16-Oct-2007 Revision 14 15 16 Updated Table 5 on page 9 Mechanical data typo Updated Section 5: Application circuit on page 9 Changes
15/16
L5970D
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
16/16
Document Number: 7324
(268 kb)
