STV7622/STD
TCP for the STV7622 data driver
Data Brief
Features
s s s
Description
The STV7622/STD is a 70mm wide, 12 sprocket hole Tape Carrier Package (TCP) assembled with the STV7622 die.
70 mm film width 12 sprocket holes Sn plating TCP pinout
Figure 1.
DUMMY DUMMY DUMMY OUT 192 OUT 191 OUT 190 ... ... ...
248 247 246 245 244 243 242
STV7622 die
May 2007
DUMMY DUMMY DUMMY VSSP VSSP NC VPP VPP VPP NC VSS VDD VCC DB6 DB5 DB4 DB3 DB2 DB1 STB 1 CLK 1 /B LK VSS LOG POC VREF RS1 RS2 VSS LOG FS2 FS1 VSS LOG DIR BS 1 VSS LOG BS 2 TEST1 TEST2 VCC VDD VSS NC VPP VPP VPP NC VSSP VSSP DUMMY DUMMY DUMMY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Potting resin Bump Die
Rev 1
57 56 55 54 53 52 51
... ... ... OUT 3 OUT 2 OUT 1 DUMMY DUMMY DUMMY
Copper adhesive
Polyimide
1 /7
www.st.com 7
For further information contact your local STMicroelectronics sales office.
STV7622/STD pin assignment
STV7622/STD
1
STV7622/STD pin assignment
Table 1.
Pin number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Input pins
Pin name DUMMY DUMMY DUMMY VSSP VSSP NC VPP VPP VPP NC VSS VDD VCC DB6 DB5 DB4 DB3 DB2 DB1 STB1 CLK1 BLK VSSLOG POC VREF RS1 RS2 VSSLOG FS2 FS1 VSSLOG DIR
Table 1.
Pin number 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Input pins (continued)
Pin name BS1 VSSLOG BS2 TEST1 TEST2 VCC VDD VSS NC VPP VPP VPP NC VSSP VSSP DUMMY DUMMY DUMMY
Table 2.
Pin No. 51 52 53 54 55 56 ... 244 245 246 247 248
Output pins
Pin Name DUMMY DUMMY DUMMY OUT 1 OUT 2 OUT 3 ... OUT 191 OUT 192 DUMMY DUMMY DUMMY
2/7
STV7622/STD
TCP dimensions (general)
2
Figure 2.
TCP dimensions (general)
TCP dimensions
3/7
TCP dimensions (details)
STV7622/STD
3
Figure 3.
TCP dimensions (details)
Input and output leads
4/7
STV7622/STD Figure 4. Cross section of outer lead
P0.264 min. 0.115
Material description
0.14 +/- 0.015
4
Material description
Table 3. Material
Reference 70 W 12 P UPILEX-S TOMOEGAWA V VLP Sn AE-70-M11 FS - 100L 5020 Dimension 57.00 758 12 4 255 0.20.05 26 20 Units mm m m m m m
Parameter Film Base film Adhesive Copper Plating Solder resist Flex resin Encap Die information Bonding Die size Die thickness IL count IL min. pitch IL width Pattern min. pitch Pattern min. width Face up
15.19 × 1.49 0.75 234 74.885 W 35 74.885 35
mm × mm mm
m m m m
5/7
Ordering information
STV7622/STD
5
Ordering information
Table 4. Order codes
Part number STV6422/ST-D Description TCP 48mm SuperWide in 405mm Reel
6
Revision history
Table 5.
Date 31-May-2007
Document revision history
Revision 1 Initial release. Changes
6/7
STV7622/STD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
7/7
|
